Lun - Sam: 9:00 - 18:00
Paint based on thixotropic alkyd resins with a deep matt appearance, for decoration interior. It presents a good nish of very good washability.
Pliolite-based solvent-based paint. High resistance paint with good resistance to aggressive atmospheres and alkaline and with good coverage
Paint in aqueous phase definition matt for current interior and exterior work. Paint with good opacity and good whiteness
it is intended for all wall covering work inside homes, offices, premises open to the public, industrial or other premises. It is used for gluing all types of tiles on vertical supports such as: 1-Renders of cement mortar or bastard mortar. 2-Rough masonry (stones, bricks, terracotta, cellular concrete block). 3-Walls and walls in shuttered or prefabricated concrete. 4-Old ceramic coverings. 5-Wood-based and wood-derived substrates 6-Plasterboards
It is used in the mixing water for all types of mortars; cement mortars, coatings, screeds, lime, plasters.
– It is recommended for repair, retrofit and concreting work.
– It greatly improves the adhesion of mortars on old substrates; It increases resistance to traction ; It limits the risk of ssuration; It improves surface hardness.
– It allows an improvement in the resistance to tearing of non-admixed mortars of approximately 2.5 times .
It is used for the realization of interior and exterior joints of all the usual coatings for floors as for walls such as sandstone, terracotta, earthenware, mosaic, marble, granite, rock limestone, glass paste
– Building: non-traffic waterproofing, waterproofing, protection of cement substrates, waterproofing of foundations and buried structures. – Public Works: waterproofing of structures. – Insulation: water vapor and gas tightness screens in the freezing chambers and in controlled atmosphere. – Industry: * Coating and protection of frames, fences, pro les, etc. * Protection of pipes, cisterns and metal tanks as well as pipes and other elements in reinforced concrete, bre-cement, etc.
a bituminous mastic for sheet metal, it is a paste composed of coal pitch and llers, implemented at cold. it can be used under water and on a damp surface.
It is mainly intended for the cold bonding of modified bitumen membranes (APP) of the DERBIGUM type. Africa as well as the bonding of certain insulators. Cold bonding with DERBICOL is mainly used in complexes with insulation. It is used for bonding insulation, in particular cork, glass wool, rock wool, etc. excluding panels sensitive to polystyrene-type hydrocarbons. On all these insulators, the DERBIGUM Africa will preferably be applied by cold gluing with DERBICOL to avoid any direct contact with the flame with insulation. DERBICOL is also recommended for setting up DERBIGUM Africa for repairs to compensate for irregularities in the substrate. It allows the implementation of membranes on supports such as wood, chipboard